Distributors

Sitemap

 


BRICKLEDGE

Drop-In

6”x6” Plate Bracket
With 4” Slot

Attaches to top of forms with pin and wedge, aligner clamp with 5/8" pin, vise-grips or "C" clamp. Provides more opportunity to align with holes at end rails due to the slotted plates.

 Also available with 8" and 10" plates

Brickledge over 17" in depth has a nailer area provided for simple attachment to the form. This eliminates creeling problems.

 

Lug Bracket w/ 1”
Obround Hole

Attaches to top of forms with pin and wedge, aligner clamp with 5/8" pin, vise-grips or "C" clamp.
Drop-In Method

Slipover Brickledge Forms

Available in steel or aluminum. Slipover brickledge forms are used to create various sized brickledge fillers. Used in conjunction with Plate or Lug Bracket Brickledge.

Available in sizes up to 24" wide




Denver Brickledge

Just as its name implies, this was originally designed for the Denver area. It's perfect for allowing adjustment to your brickledge depth by pinning to the interior hole of a combination tie.

Offset Method - Forms

Offset Endbar Panel

Can be built with 2” or 4" offset for brickledge applications.

Offset Method - Hardware

Saddle Bracket

Unique brackets that allow another option for brickledge. The brackets pin onto the top rail of the lower form and allows the next stacked forms to be inset 4 inches or 6 inches.

Brickledge Bar

The Brickledge Bar permits another option for brickledge. The brackets pin onto the top rail of the lower form, then wood is nailed to under side of bracket. Upper panel is then placed on top of brickledge bar to create a 4" brickledge.

 

 

 

 


 

Top