ConcreteForms

WALER BRACKETS

Locking Waler With Pin

The locking feature on this waler bracket ensures a good connection. The pin is attached with a flange that overlaps both siderails. No loose hardware! Available in: 2" x 3" ~ Product #SWA23000000099 2" x 4" ~ Product #SWA24000000099 2" x 6" ~ Product #SWA26000000099 Not to be used in tie location.
	Available in: 2" x 4" ~ Product #AWA24000000000 2" x 6" ~ Product #AWA26000000000

	Note: When utilized with the WTF tie, stripping is accomplished by striking downward with a 2" x 4" from the top of the wall.

Vertical Waler	Vertical Stiffener
		Used in much the same manner as the vertical waler. Vertical stiffeners are faster than vertical walers because there is no lumber required. Used on opposite side of the wall from walers. Saves time when stacking by eliminating the need to stagger or stack short and tall forms. Specify hole pattern: 6/12 ~ Product #AWA10000000010 8/8 ~ Product #AWA10000000020
Product #SWA10000000000 Note: 2" x 4" lumber is used on both sides of bracket