 |
 |
 |
 |
SPECIAL
APPLICATION HARDWARE
| 90
° Angle Clip 
|
45
° Angle Clip 
|
Versatile 90°
angle clip can be a substitute
for full length outside corner angle to create an outside corner using fillers. Steel Product #SCL90000000000 |
Our
45° angle clip with rotating pins will affix two filler panels
to form outside corner opposite a hinged inside corner. Can form
35° to 55°, depending upon the tightness of wedges. Product #SCL45000000000 |
| Aluminum Cap Clip |
Cap/Filler Bracket |
The
aluminum cap clip is designed to create a cap with 2"x12"
lumber.
Product #ACL10000000000  |
|
| Window
Clamp
The
window clamp is used at the top of the wall when a drop-in window
buck is used. This clamp ensures that the window buck maintains
a tight fit.
Product #SCP13000000000
|
Saddle
Bracket  Unique brackets that allow another
option for brickledge. The brackets pin onto the top rail of
the lower form and allows the next stacked forms to be inset
4 inches or 6 inches.
4"~Product #SBK04000000000 |
Cap/filler
brackets are used in conjunction with lumber to add height to
a wall. The cap filler bracket pin is inserted into the top of
the form and the lumber is then nailed to the bracket. May also
be used to construct job site plywood fillers when you need an
extra filler or where you need to pass a pipe or other object
through the form.Brickledge Bar |
The Brickledge Bar permits another option for
brickledge. The brackets pin onto the toprail of the lower form, then wood is nailed to under side of bracket. Upper panel is then placed on top of brickledge bar to create a 4" brickledge. Product #AOT00000000001 |
| Top |