Crete-Lease 727 is a mineral based release agent that has been used for more than 25 years. It applies at low and high ambient temperatures and it exceeds all state and federal VOC regulations.

Basic Use: Crete-Lease 727 permits easy stain-free removal of forms, formliners, pallets, etc. from hardened concrete. It:
~ Cuts form clean-up time up to 70% when properly applied.
~ Can reduce bugholes on concrete surfaces.
~ Does not interfere with adhesion of caulk, architectural    coatings, paint, sealers, and curing compounds on cured    concrete surfaces when properly applied.
~ Works superbly on aluminum forms.
~ Can be applied in sub-freezing or very hot temperatures.
~ Reduces incidences of skin rashes to an absolute minimum.
~ Can produce both high visual impact (CCS 2) and typical concrete surfaces
   (CCS 3, CCS 4, CCS 5).

Even when applying 10 times more than required
~ No staining when cured at ambient temperatures.
~ Concrete surfaces are not "killed".
~ Does not cause efflorescence.

Ready to use - Available in:
5 Gal. Pail ~ Product #CMCR7270000005
55 Gal. Drum ~ Product #CMCR7270000055
275 Gal. Mega Pack ~ Product #CMCR7270000275